Draug LARP Sword - 85 cm

Item # MCI-3517
MPN: 442440
$87.00
Availability: 24 in stock

The armies of the undead require an equally frightening weapon. The Draug LARP Sword is ideal for guarding treasure or freshly dug graves. Use this hybrid foam sword to fight the living. The blade consists of EVA foam with a latex coating while polyurethane foam forms the handle around a fiberglass rod core. Two fullers adorn the double-edged blade. A worn and chipped appearance covers the blade. A leather strip wraps around the handle which ends in a scent-stopper pommel. The grip of the handle features an ergonomic shape. The hand guard contains a stylized skull detail in the center. Draw this ghastly blade at your next LARP battle or fantasy convention.

The Draug LARP Sword has an overall length of 33.5 inches. Please be aware that this measurement can vary slightly, as it is a handmade item.

Key Features:

  • Hybrid foam construction
  • Double-edged blade with two fullers
  • Scent-stopper shaped pommel
  • Closed cell foam is durable and shred resistant
  • Features a flexible fiberglass core

Materials:

  • Handle is made from polyurethane foam and wrapped in leather
  • Blade is made from EVA foam
  • Core is made of fiberglass
  • Finished with a latex coating

Care Instructions:

  • Latex weapons need to be maintained to a certain degree. We offer a Maintenance Silicone (MCI-2000) that can be purchased separately in the LARP Accessories section. We recommend that you use this silicone on a regular basis. It is an easy, spray on application, and it will keep the coating flexible, which will make the weapon last much longer. The maintenance silicone also protects the coating from drying out and helps the weapon resist general wear and tear from normal use.
  • Store latex weapons flat or on the pommel, never on the tip, and in a cool, dry environment. Use a towel or sheet to protect the LARP weapon from adhering to plastic or rubber surfaces.
  • For the leather on the handle: Remove dirt with a hard brush, then gently clean with leather soap and a soft, damp cloth. Remove soap with a separate damp cloth, then use a dry cloth to wipe away remaining water. Let dry naturally. Condition with oil or polish, then wipe with a final cloth to remove excess residue.

Measurements:

  • Length: 33.5 Inches
  • Grip Length: 4.9 Inches
  • Blade Length: 23.2 Inches
  • Blade Width: 2.8 Inches
  • Crossguard Width: 7.5 Inches
  • Handle Circumference: 3.9 Inches
  • Weight: 12.8 Ounces

Measurements are approximate.

The armies of the undead require an equally frightening weapon. The Draug LARP Sword is ideal for guarding treasure or freshly dug graves. Use this hybrid foam sword to fight the living. The blade consists of EVA foam with a latex coating while polyurethane foam forms the handle around a fiberglass rod core. Two fullers adorn the double-edged blade. A worn and chipped appearance covers the blade. A leather strip wraps around the handle which ends in a scent-stopper pommel. The grip of the handle features an ergonomic shape. The hand guard contains a stylized skull detail in the center. Draw this ghastly blade at your next LARP battle or fantasy convention.

The Draug LARP Sword has an overall length of 33.5 inches. Please be aware that this measurement can vary slightly, as it is a handmade item.

Key Features:

  • Hybrid foam construction
  • Double-edged blade with two fullers
  • Scent-stopper shaped pommel
  • Closed cell foam is durable and shred resistant
  • Features a flexible fiberglass core

Materials:

  • Handle is made from polyurethane foam and wrapped in leather
  • Blade is made from EVA foam
  • Core is made of fiberglass
  • Finished with a latex coating

Care Instructions:

  • Latex weapons need to be maintained to a certain degree. We offer a Maintenance Silicone (MCI-2000) that can be purchased separately in the LARP Accessories section. We recommend that you use this silicone on a regular basis. It is an easy, spray on application, and it will keep the coating flexible, which will make the weapon last much longer. The maintenance silicone also protects the coating from drying out and helps the weapon resist general wear and tear from normal use.
  • Store latex weapons flat or on the pommel, never on the tip, and in a cool, dry environment. Use a towel or sheet to protect the LARP weapon from adhering to plastic or rubber surfaces.
  • For the leather on the handle: Remove dirt with a hard brush, then gently clean with leather soap and a soft, damp cloth. Remove soap with a separate damp cloth, then use a dry cloth to wipe away remaining water. Let dry naturally. Condition with oil or polish, then wipe with a final cloth to remove excess residue.

Measurements:

  • Length: 33.5 Inches
  • Grip Length: 4.9 Inches
  • Blade Length: 23.2 Inches
  • Blade Width: 2.8 Inches
  • Crossguard Width: 7.5 Inches
  • Handle Circumference: 3.9 Inches
  • Weight: 12.8 Ounces

Measurements are approximate.

Write your own review
  • Product can be reviewed only after purchasing it
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
Customers who bought this item also bought

LARP Dagger Holder

Item # MCI-3296
If you want to take your trusted dagger with you on your adventures, the LARP Dagger Holder is a classic way to carry it! This leather dagger frog has a traditional loop structure that can be worn on either the right or left side.
$7.00

LARP Long Roman Spatha

Item # MCI-3250
Reveal matchless prowess and loyalty to the Roman Empire as a soldier of the heavy infantry, or earn freedom and renown as a gladiator of the arena. Regardless of the chosen role, the LARP Long Roman Spatha serves well in battle.
$89.00

Norman Nasal Helmet

Item # MCI-2423
Nothing beats a classic Norman Nasal Helmet when it comes to a classic Viking look. This helmet features a shiny metal finish that makes the helmet all but gleam in the light, while retaining the classic look of a Norman helm.
$64.00

Sven Shield

Item # MY100347
When it comes to defense, you cannot forget the importance of a good shield. The Sven Shield is made out of thick, uncoated weapon foam, making it great for use in LARP events. The face of the shield is a historic, circular shape
$71.00

Kettle Hat Helmet

Item # MCI-3032
Grab your sword and shield, and step into rank as you prepare for battle with the Kettle Hat Helmet. This stunning replica helmet can be a great addition to any costume that requires an authentic and distinctive medieval style.
$104.00

Modals